Skip to main content
leaderboard1

Products

BAUER involved in constructing a tunnel under the Suez Canal
October 4, 2016
The widened Suez Canal, located at Ismailia in Egypt, is now providing extra capacity for vessels, having been officially opened in August 2015. The waterway has great significance for world trade and has been widened at certain points and also expanded.
JCB provides tight turns thanks to its 3CX compact backhoe loader
September 30, 2016
UK equipment hire specialist MAC Surfacing has taken delivery of two new JCB 3CX compact models. They join several JCB 2CX Streetmasters in the West Midlands-based company’s hire fleet.
Eurovia revolutionising surfacing dressing with Etnyre chipper
September 30, 2016
Eurovia Specialist Treatments, part of Eurovia UK, are strengthening their armoury with the introduction of a customised Etnyre chipper spreader from the US. A Eurovia team worked with Etnyre to develop the operating parameters, enhanced health, safety and environmental compliance of the model. The self-propelled high-performance surface dressing chipper has a Cummins low-emission 194kW Tier IV engine.
New Doosan DL450-5 Wheel Loader is Lynchpin Machine at Tulloch
September 30, 2016
Tulloch Developments, a large civil and marine engineering contractor in Shetland, off the north coast of Scotland, has purchased a new Doosan DL450-5 wheeled loader. The machine arrived from the Scottish mainland’s Inverurie-based Balgownie, an authorised Doosan and Bobcat dealer.
Yanmar mini excavator B-7 Sigma works in a tight spot
September 30, 2016
A compact excavator B7 Sigma by Yanmar Construction Equipment Europe has produced a big effort in the small German town of Dorfhain, near Dresden. The machine, acquired from the Yanmar dealer SK Baumaschinen, has as a special feature the Sigma boom that enabled it to work very precisely on a driveway located on a difficult slope and with limited swing area.
Record breaking ABM bridge beams installed near Raith, Scotland
September 30, 2016
One of the largest mobile cranes in the UK, a 1,500tonne capacity unit, recently positioned nine 90tonne 42m pre-stressed bridge beams by ABM Precast Solutions. The massive W-beams were hoisted into place at Junction 5, the Raith Interchange, on Scotland’s M74 motorway – part of the M8-M73-M74 motorway improvements project.
Oklahoma opts for IRD’s electronic truck screening system
September 30, 2016
In a US$2.59 million contract, Dynamics (IRD) is to build, implement and maintain a port-of-entry (POE) electronic screening system for commercial vehicles in the US state of Oklahoma.
Parsons to design traffic management system for Florida’s I-95
September 29, 2016
Florida’s Department of Transportation has selected Parsons to provide final design services for an expansion of a traffic management system on the I-95.
Liebherr’s special delivery in special livery for Transbeton
September 14, 2016
Liebherr has handed over its 90,000th truck mixer since it began manufacturing the vehicle in 1967. Transbeton, based in the southern German town of Laupheim, collected the semi-trailer HTM 1004 ZA that has a normal 10m3 capacity but had been specially painted for the occasion. Transbeton has been a Liebherr customer for almost 50 years, using truck mixers and concrete mixing plants. “I always have two semitrailers in my fleet”, says Reinhold Brehm, “because it increases our transportation capacity fo
Powershift transmission for Terex dumpers
September 13, 2016
The first site dumper units featuring Terex Construction’s new Powershift transmission have rolled off the production line at its manufacturing facility in Coventry, UK. The 2016 TA9P models, also featuring Stop-Start engine control and Autoshift technology, will soon be added to GAP Group’s national equipment fleet. Available on all models across the Terex TA9 and TA10 site dumper portfolios, Powershift transmission allows smooth, efficient gear changes, helping operators to select the correct gear f
Minnich machines helping upgrade Venice airport
September 13, 2016
The Marco Polo Airport, which serves the Italian city of Venice, is in the midst of a major upgrade to boost capacity. The work is being handled by the SAVE Group and involves a €630 million expansion and renovation of the facilities. This will increase capacity with one major phase of the plan being the 2015-16 extension of the apron. This challenging task has been tackled by NORDPAVI, an Italian concrete contractor that specialises in airport work. The firm is based in Bolzano in Italy’s South Tyrol an
The road funding question posed by EVs
September 9, 2016
The growing market for electric vehicles (EVs) and hybrids world-wide will help reduce urban pollution in many areas, while also cutting reliance on oil for fuel. This switch away from reliance on oil for fuelling vehicles is undoubtedly a good thing and will help address pollution on a localised level and climate change right across the globe. However, it will also bring radical changes to the way that road development is funded.
VIDEO: He shoots! He scores!
September 2, 2016
Many manufacturers claim that their machines are “versatile” or “flexible”, even “fast reacting” when working on site. But life shouldn’t be all work and no play. Even excavators and their drivers need a day off for some fun and one New York state contractor, Fastracs, has for three years made the point.
Leica Geosystems' smart GNSS antenna
August 25, 2016
Leica Geosystems is now offering a smart, versatile antenna for use in GNSS monitoring applications. The firm says that this high-quality device is customisable to fit a wide array of project requirements. The unit is sophisticated, while offering reliability and ease-of-use and combines both GNSS antenna and receiver. The new smart antenna can be used for monitoring installations in static, long-term projects. The unit can also enable dynamic monitoring with up to 10Hz data streaming and multi-freque
Accurate payload measurement from Flintec
August 25, 2016
Flintec is offering its touch screen, FT-30M on-board vehicle weight indicator. The unit has a colour touchscreen display and is capable of displaying weights in either kg or lbs. It can be used for recording and printing container receipts. Data can be downloaded, viewed or printed via the multiple connections available, including USB and RS232. It runs a Windows-embedded operating system, which is said to allow for easy system updates and software modifications, if required. FT-30M is said to be easy t
catfish1