Products

UK QUARRY OPERATOR is now using a Sandvik hydraulic breaker for primary winning. This technique has been introduced to the operation to solve a face stability challenge and is being used instead of blasting. The 3.8tonne BR4511 was supplied by local Sandvik breaker dealer M&M Plant and is mounted on a Komatsu PC450-8 hydraulic excavator.

A new wearing course applied by Bolidt on the entire eastern section of the Erasmus Bridge in Rotterdam is helping improve the surface for road users. The bridge forms an important link in the centre of the city of Rotterdam and using its equipment Bolidt was able to apply 3,000m2 of new wearing course on Erasmus Bridge in 4 hours. The Rotterdam authorities commissioned Bolidt again after the previous surface the firm applied, its Bridgedeck Up product, lasted over a decade. This time the work was carried o

CATERPILLAR is boosting its soil compactor range with the introduction of the CS44 and CP44 models. These machines are aimed at the 5.5-8tonne class and share many features with the proven 400ESeries Soil Compactors as well as the Production-Class range.

ATLAS COPCO is introducing its new QAC800 generator, which can deliver up to 800kVA and replaces the earlier QAC750 model. The QAC800 supplies power at 50Hz and is designed to meet increasing demands from generator users. The machine is an upgrade of the well-proven QAC750, which delivers 750kVA. Although the electric power output is increased the unit still uses the same MWM engine however. Designed for extreme operating conditions, the QAC series generators can work in all weathers. A built-in engine cool

The issue of barrier conspicuity presents safety challenges and a novel painting system has been developed by EZ-Liner that is said to boost productivity. The firm has a patent pending for its new Ultra Guard device, which can be mounted on a standard striping machine. The Ultra Guard unit can be used to paint lines on either steel or concrete barriers and the package includes an airless or airpsray paint gun

Lightweight and versatile, the new Lightning Strike screed is said to offer a productive option for concrete construction. This roller screed features easy transport and can be set up by a single person, while requiring just two for use. The screed can be used for an array of applications including pervious concrete or low slump mud as well as the capability to do uphill, downhill or circular pours. Featuring aluminium tubes this units is around half the weight of conventional roller screeds, reducing trans

Extend Manufacturing has developed TMX Towable Mini-Excavators that offer high digging power in an easy-to-manoeuvre package.

Doosan is aiming its versatile DX235LCR versatile short tailswing excavator squarely at the growing market for reduced radius machines.

Bobcat is rolling out its S650 skid-steer loader, said to be the first of a new generation of machines. This unit offers a vertical lift path and has an operating weight of 3.8tonnes, a rated operating capacity of 1.2tonnes and a tipping load of 2.44tonnes. Innovative features include a new cab located in a forward position, boosting all-round visibility by 30%. The S650 has a height of just over 2m, a width of 1.88m, length with bucket of 3.5m and a bucket hinge pin height of 3.15m.

The Danish Road Directorate has signed a contract with the Australian states of New South Wales and Queensland regarding the measurements of more than 16,000km of roads.

Atlas Copco is upgrading its mid-sized compressors for the construction industry with new features including the use of the latest Deutz engines. The new XAHS 237+ compressor delivers air at 12bars and a rate of 236litres/sec while the XAMS 287+ is rated at 8.6bars and delivers a flow rate of 285litres/sec. The engines are said to feature good fuel economy due to the use of the innovative and proven FuelXpert system, which regulates speed and air intake. Other features include centralised fluid drains, acce

Sandvik has carried out a two day Quarry Academy for key senior industry personnel in Qatar. The event was used to discuss blasting and crushing solutions to meet demand for the large volume projects forecast for the region. The event was jointly sponsored by local distributors Q-FAB and Boodai and was attended by around 40 key senior management figures from Qatari contractors, quarry operators and drill and blast companies. The event was run as a continuous lecture-style presentation on the quarry process.

Nottingham city in central England has upgraded its Urban Traffic Control (UTC) system to PC SCOOT, supplied and installed by Siemens, to further improve the management of the traffic network around the city. PC SCOOT will initially monitor over 450 junctions and all major routes within Nottingham, with the aim of reducing congestion and CO2 emissions and improving journey times.

Generator manufacturer SDMO says that its new 102mm water pump and 3kW generator offer high performance and portability. Both are powered by Kohler engines, with the 5.2kW Command CH270 petrol engine in the PERFORM 3000 generator and a 5kW KD350 diesel engine in the TRASH 4 pump. The PERFORM 3000 features a solid and compact frame with a 4.1litre fuel tank that allows 3.2 hours continuous use. Power output for the 43kg unit is 3.75kVA through 110V and 240V 16A sockets. The set is protected by two individual

LiuGong Machinery Corporation has unveiled and discussed a bold five-year strategy, which directs the company towards breaking into the top ten construction equipment brands globally. The Chinese company, which set a company record in wheel loader sales in 2009, achieved another major milestone, saying it has built and sold its 200,000th wheel loader. To celebrate the milestones it hosted a conference and celebration ceremony in Beijing for customers, industry partners and the industry trade, where the stra