Skip to main content

RCC road paving technology growing in demand

US contractor Robert Smith based in Chattanooga has long experience in the asphalt paving market but has recently added roller compacted concrete (RCC) to its paving portfolio. This heavy-duty cement mix can be poured as quickly as asphalt and the company has now developed its skills at laying large areas of RCC in just a few days for its industrial client base. Demand has grown and RCC work now accounts for over 90% of the firm’s workload, which it carries out using a Volvo CE paver.
November 13, 2014 Read time: 4 mins
Some UK firms are also now using RCC surfacing for areas where there are many heavy vehicles

US contractor Robert Smith based in Chattanooga has long experience in the asphalt paving market but has recently added roller compacted concrete (RCC) to its paving portfolio. This heavy-duty cement mix can be poured as quickly as asphalt and the company has now developed its skills at laying large areas of RCC in just a few days for its industrial client base. Demand has grown and RCC work now accounts for over 90% of the firm’s workload, which it carries out using a Volvo CE paver.

One important job the firm had to carry out was to repave the Jack Daniels distillery site in Lynchburg, Tennessee, to deal with a major maintenance issue regarding its warehouse access roads. The asphalt roads were proving unable to cope with the weight of the heavily laden trucks carrying products to and from the warehouse. Using the Volvo CE ABG 7820 paver, the contractor was able to pave some 92m2/hour of concrete. This covered over 49,000m2 of new roads and stockyards, with a 130mm layer of the compacted concrete placed over 150mm of compacted aggregate base.

359 Volvo CE tracked pavers are designed to handle a wide range of materials from the wearing course down to the base courses on diversified contracts. The Volvo ABG7820 paver features a smart power paving mode that gives high power when needed and reduces fuel consumption when less power is required. It also features an electronic paver management (EPM) function that is said to be simple to use and allows effective storing and analysing of machine data.

While 1074 RCC is a proven system it is still used only infrequently due to strong competition from asphalt paving and conventional poured-in concrete.

Demand for RCC is growing in the US, such as for sites where there are large numbers of heavy delivery vehicles. In Europe the RCC market has yet to develop, but The Concrete Centre in the UK believes that the benefits of this technique will see increasing use. The Concrete Centre is part of the 5338 Mineral Products Association (MPA) and according to director Andrew Minson, RCC surfaces are already becoming more common for use in industrial pavements, heavy-duty parking and storage areas, as well as for some roads.

Originally developed in the 1970s, it is increasingly being viewed as an economic, long-term road surfacing material according to Minson. The RCC surfaces use cement, water and aggregates as with conventional concrete but feature drier mixes that are stiff enough to be compacted by vibratory rollers. This paving method needs no joints, dowels or steel reinforcement and needs no finishing.

Minson says that RCC combines the strength, long-term performance and minimal maintenance of conventional concrete with the ease of construction associated with asphalt paving. For roads RCC offers key advantages in that it can span localised soft subgrades, provide resistance to deformation under heavy concentrated loads and will not soften in high ambient temperatures.

Laying RCC is not complex and delivery requires large-capacity mixers to blend the material as it is transported to site and discharged into a modified asphalt paver. The machine places the materials in layers up to 250mm thick and 13m wide.

Compaction starts immediately after placement and continues until the pavement meets density requirements. Curing ensures a strong and durable pavement. Where appearance is important, joints can be saw-cut into the RCC to control crack location. If economy is more important than appearance, then the RCC can be allowed to crack naturally.

In the UK, RCC with induced cracking and binder/surface courses is increasingly being considered for truck lanes and highway widening projects, and as an alternative to fully flexible pavements.

The benefits of RCC have been underlined by research carried out at Sheffield University. There, researchers as part of the Ecolanes FP6 project have developed a RCC with recycled steel fibres from waste tyres that is 12% cheaper than conventional road construction and is 15% faster to construct. According to The Concrete Centre, RCC has significant potential as it is economical and fast to lay, has long-term performance with minimum maintenance, resists rutting and potholing and can use waste materials for its construction. In addition, at the end-of-life the material can be crushed and recycled for a new pavement.

For more information on companies in this article

Related Content

  • US RCC paving job carried out with Volvo CE machines
    October 21, 2016
    US contractor Conewago Enterprises is using a paver from Volvo CE to lay a roller-compacted concrete (RCC) surface at the Liberty Trust distribution centre in Shippensburg, Pennsylvania. This facility lies close to Interstate-81, which runs through the Appalachian Mountains from the Canada-US border to Tennessee. This 1,376km route carries heavy truck traffic and as a result, hundreds of distribution warehouses have being constructed along the route of this busy transport corridor. Conewago Enterpris
  • Latest bitumen mixes improve roads, reduce noise
    February 14, 2012
    Special bitumen mixes and machines are capable of improving the service life of roads and reducing noise. Mike Woof and Patrick Smith report. The need to improve traffic flow in an important part of the City of Poznan, Poland, led to the decision to build a new 1.13km long dual carriageway.
  • Dynapac machines used for RCC paving in Germany
    August 10, 2018
    Paving machines from Dynapac were used recently to install roller-compacted concrete (RCC) in Germany. The job was carried out in cooperation with the firm’s long-term customer STRA-LA-BAU, based in Dortmund, Germany. The German contractor STRA-LA-BAU has several Dynapac pavers in its fleet, including DF45CS, F1200CS and F1700C models, as well as Dynapac rollers. The firm laid the RCC surface on behalf of Holcim. There is an external warehouse planned on which heavy machine parts for the packaging indust
  • Growing niche market for roller compacted concrete
    February 20, 2012
    A growing niche market for roller compacted concrete has prompted manufacturers to offer solutions. Mike Woof reports. Increased demand for roller compacted concrete (RCC) machines in certain applications mean that this is now a growing market, with manufacturers having developed new machines for this sector. RCC comprises uncrushed and/or crushed aggregate, hydraulic binders and may also contain concrete additives. It is mixed in a concrete mixing plant on or near the job site and one of its main benefits