Skip to main content

A Hardanger to follow

Two MDT 128 topless cranes from Potain are said to be playing a crucial role in the construction of the Hardanger Bridge in Norway - set to be one of the longest suspension bridges in the world. The 6tonne cranes are placing suspension cables, and making other lifts, at the top of one of the bridge’s pylons, where working heights exceed 200metres. The cranes are owned by Ajos, a leading crane rental company and the Potain dealer for Denmark. Ajos supplied the cranes to MT Hojgaard, one of the largest cont
June 13, 2012 Read time: 3 mins
Two Potain MDT 128 topless cranes are playing a vital role in building the Hardanger Bridge in Norway
Two MDT 128 topless cranes from 5916 Potain are said to be playing a crucial role in the construction of the Hardanger Bridge in Norway - set to be one of the longest suspension bridges in the world.

The 6tonne cranes are placing suspension cables, and making other lifts, at the top of one of the bridge’s pylons, where working heights exceed 200metres.

The cranes are owned by Ajos, a leading crane rental company and the Potain dealer for Denmark. 5915 Ajos supplied the cranes to MT Hojgaard, one of the largest contractors in Scandinavia. The company also provided two of its most skilled operators to the project.

The exposed site means the Potain cranes have no protection from the tough Scandinavian weather, where temperatures fall as low as –40°C and wind speeds can reach up to 217 km/h. Such extreme conditions mean the cranes enter out of service conditions, but even when temperatures rise and wind speeds fall to acceptable levels for operations, maintaining lift schedules on the project is said to have remained a challenge. Work is continuing 24 hours a day on the job, meaning highly durable equipment is required, plus the latest lifting technology.

For the Hardanger job, the MDT 128 cranes have been fitted with Potain’s 50 LVF GH Optima winch, and both are working with four falls of wire rope. This set-up is said by Potain, which is a brand owned by US-firm 2123 Manitowoc, to allow the cranes to lift their maximum capacity, and also allows both high-speed hook operation and more precise movements when placing loads in their final position. The cranes are currently configured with 35metre jibs.

Assembling the cranes presented a challenge as steep valley walls lead down to the base of the pylon, and minimal space is available at ground level.

Jørgen Egede Saabye, technical manager at Ajos, said the MDT 128s were performing well and have needed no attention aside from regular maintenance.

 “This is a high-profile project on a tight schedule and when you’re working this high up, you need to have confidence in your equipment. With these MDT cranes we have that.”

Located over Hardangerfjord near Bergen in south-west Norway, the €300 million Hardanger Bridge will span 1,310 metres – 20metres longer than the Golden Gate Bridge in San Francisco. Construction began in early 2011 and is due for completion in 2013.

For more information on companies in this article

Related Content

  • Project underway for Chinese bridge
    May 15, 2014
    Potain tower cranes are being used to construct a major cable-stayed bridge in China. The conditions are tough and feature high winds and monsoon conditions, with the cranes working at an altitude of 1,500m above sea level in a mountain range in southern China to build the Duge Beipanjiang Bridge, which will span 720m when it is complete The job is requiring six Potain tower cranes in total during the course of the US$92.75 million (570 million RMB) project. Two cranes have been erected at the job site a
  • New German autobahn bridge under constriuction
    May 1, 2015
    Crane manufacturer Manitowoc has supplied six Potain cranes to German contractor Max Bögl. These machines are being used for constructing a new bridge carrying the A3 autobahn, close to Limburg. Working at over 70m high, the cranes tower over the Lahn Valley. The cranes for this project were supplied by Max Bögl’s subsidiary, Max Bögl Transport & Geräte. The three topless Potain MDT 222 cranes were selected for the work as they feature tip heights of up to 76.2m and can operate with a working radius of
  • Cranes help construct major bridge project in China
    September 8, 2014
    A number of tower cranes have helped complete the Chishi Grand Bridge project in China. Six Potain tower cranes were used to build two 280m tall bridge pylons, high in the clouds above the mountains of southern China. The cranes spent 30 months building the pylons at the Chishi Grand Bridge, which will span 1.47km and carry its road deck 180m above the ground. The bridge will open at the end of 2014.
  • Novel phones for Norway’s new bridge
    May 10, 2012
    Norphonic emergency roadside telephones (ERT) have been selected for the Hardanger Bridge, one of the world’s longest suspension bridges, crossing the picturesque Hardangerfjord in southwestern Norway. The Hardanger Bridge will be among of the longest suspension bridges in the world, even longer than the Golden Gate Bridge in San Francisco, with a total suspension-span of 1310 meters and will significantly improve the connection between Norway’s two largest cities (Oslo and Bergen). Norphonic was awarded