Skip to main content

Products

Belgium takes Case Rodeo prizes
February 19, 2014
Sebastien Pirlet, from Belgium, triumphed in the 2013 Case Rodeo operator competition. An incredible group of skilled operators from 13 countries took part in the European Final, having already won their respective national competitions. This included the competition’s first female Swedish operator, Lise Lott Jansson. All of the competitors attending the event, which was held at the Case Customer Centre at Monthyon near Paris, were put through four tests of ultimate machine control and precision operating.
Isle of Wight road stability scheme ‘first’ at Niton’s Undercliff
February 19, 2014
John Peck Construction has been awarded the contract to carry out the first major road stability scheme at Niton’s Undercliff on the Isle of Wight, England’s largest island. This project is part of a major programme of special geotechnical schemes being delivered by Island Roads (made up of VINCI Concessions, Meridiam Infrastructure and Ringway) under the Highways PFI to maintain the highway at locations prone to ground movement.
Roth & Söhne future bright thanks to New Holland E385C crawler excavator
February 19, 2014
Based in Ellwangen, Germany, contractor Roth & Söhne has recently expanded its existing excavator fleet with a New Holland E385C crawler excavator. Designed primarily for heavy digging duties and handling bulk materials, the E385C also provides powerful performance combined with low fuel consumption, which were key factors in Roth & Söhne’s purchasing decision. Prior to delivery by New Holland dealer Böhrer Baumaschinen, the E385C excavator was equipped with a Trimble positioning system by SITECH West. Ba
2014 is seeing a range of engine emissions solutions coming to market
February 19, 2014
For the off-highway equipment sector, 2014 is a year of note, as this is when the Tier 4 Final/Stage IV emissions legislation starts to be phased in for North America, Europe and Japan. For several years now engine manufacturers have been working hard to meet the demands of emissions targets set by legislators. This has been an extremely challenging task and one that many in the industry believed all but impossible just 10 years ago. Manufacturers have spent enormous sums developing engines that produce low
Wirtgen offers sophisticated concrete paving system
February 19, 2014
Versatility and high performance are key features of the new SP84i slipform paver from Wirtgen. The machinie runs on four steerable crawler tracks and features its mould fitted between the crawler tracks. With a power output of 180kW, the machine can use electric and hydraulic vibration to pave roadways and surfaces and concrete can be selectively distributed by the spreading plough or spreading auger. Wirtgen slipform pavers can be used to lay concrete pavements with a double cross fall of up to 3%.
Seasonal spirits
February 19, 2014
In Poland a Santa Claus and his helper had an excessive quantity of seasonal spirit, resulting in a serious sleigh incident. The two were smiling and waving at passersby from their horse-drawn sleigh when the noise of a vehicle horn startled the animal.
Highway to hell?
February 19, 2014
An enthusiast in the US has built a motorised coffin on wheels, powered by a pulse jet. Its builder, Bob Maddox, has a strong interest in improbable vehicles and built the vehicle using a coffin and a small pulse jet, all mounted on a lightweight chassis and wheels. Weighing just 136kg, his Maddoxjets Coffin Car can accelerate from 0-100km/h in around nine seconds. According to Maddox, he once drove the Coffin Car at 100km/h but was concerned for its stability and wary of attempting to drive it any quicker.
Better excuses needed
February 19, 2014
A number of British drivers are now counting the cost for their feeble excuses for poor driving. One man was travelling at around 210km/h in his mother’s Mercedes, roughly twice the speed limit for the stretch of road, when he was spotted by police and stopped. When asked in court to explain his reasons for the inappropriate speed, he explained that the vehicle did not have cupholders and was therefore unable to hold his cup of tea. This was why he had to secure it on the seat, between his legs instead.
Twice as lucky?
February 19, 2014
A driver in Australia was stopped by police the day after he had consumed a large quantity of beer and found to be still two times over the limit for alcohol. Officers commented that the Melbourne resident was in fact lucky to be alive given the quantity of alcohol he had consumed.
Eight lives left
February 19, 2014
A van driver using a busy motorway in the UK was surprised when several other motorists flashed their headlights at her. She soon discovered however that there was reason for their behaviour as the other drivers had spotted a cat clinging to the roof of her vehicle.
Apple’s aviation inaccuracies
February 19, 2014
Two drivers in Alaska caused some concern to aviation movements by following directions from Apple Maps. The drivers first crossed the taxiway and then the runway at Fairbanks Airport. How they were able to enter the supposedly secure airport however has not been revealed and nor have their IQ ratings. The drivers ignored numerous signposts and painted markings saying that the area they were entering was restricted to aircraft and not for road vehicles. The airport authorities erected barriers until the map
Doosan delivers productive reduced radius excavator
February 17, 2014
Doosan says that its new DX140LCR-3 excavator meets an increasing demand for reduced radius machines. This versatile unit can be used on urban, utility, highway, rail, bridge and other confined space construction sites. The firm claims the machine is designed to offer productivity, comfort, reliability, durability and reduced operating costs.
Dynapac is now offering a powerful new tamping compactor
February 17, 2014
Atlas Copco Construction Equipment’s Dynapac division is introducing the CT3000 tamping compactor. Accorrding to the firm this uit offers rapid and efficient compaction for delivering specified densities on cohesive and semi-cohesive soils. With an operating weight of 22.5tonnes and an average production capacity of 820.7m3/hour, the Dynapac CT3000 is said to suit duties on projects such as highways, dams and airport runways where large-volume earthwork is required. Power comes from a Cummins diesel delive
Wirtgen introduces top of the line milling machine
February 17, 2014
Wirtgen is introducing a powerful and productive new milling machine in the shape of its W 250i. This high-performance planer is the company's most powerful cold milling machine. The machine is available with an extra-large milling drum unit for a working width of 3.8m, offering a 70% increase in milling width over a standard machine and a notable increase in performance. It also sports a camera system and the Vacuum Cutter System (VCS). High rates of productivity, maximum cost efficiency and the eco-friend
Dynapac develops tough new asphalt paver for North America
February 17, 2014
Atlas Copco Construction Equipment is launching its new F800T tracked paver into the US market. The F800T is a 2.44m class paver and is powered by a Cummins QSB6.7 diesel rated at 127kW that meets the Tier 4 Final emissions requirements. The firm says that this is a productive and stable paver for its class, while the hydraulic components are oversized with many of same units as the firm’s larger F1000 paver to ensure reliability and longevity. This will also help cut spares holding costs for fleet customer