Doosan’s DL420-5 now offers continuously variable transmission

A focus for Doosan at CONEXPO-CON/AGG is the DL420-5 CVT, the company’s first wheel loader that combines a traditional automatic transmission and a hydrostatic transmission. The CVT (continuously variable transmission) wheel loader is making its North American debut at the Las Vegas exhibition and will be available later this year in the US and Canada.
March 10, 2017 Read time: 2 mins
Doosan’s DL420-5 CVT wheel loader

A focus for 695 Doosan at CONEXPO-CON/AGG is the DL420-5 CVT, the company’s first wheel loader that combines a traditional automatic transmission and a hydrostatic transmission.

The CVT (continuously variable transmission) wheel loader is making its North American debut at the Las Vegas exhibition and will be available later this year in the US and Canada.

Unlike torque converter transmissions, the DL420-5 CVT wheel loader’s automatic transmission is a one-to-one ratio with the engine. Automatic transmission improves powertrain efficiency in load-and-carry operations.

With this new transmission offering, Doosan says that DL420-5 CVT owners and operators will see an increase in machine performance and productivity when working in digging, loading and lifting applications.

For most tasks, operators will use the hydrostatic part of the transmission, which is more efficient than an automatic transmission in low-speed applications. This hydrostatic system provides good overall performance at lower engine rpms. An on-board colour and text indicator on the dash panel informs operators when the machine is operating in the hydrostatic mode.

The result, says Doosan, is better fuel efficiency because of improved performance at lower engine rpms. There is also low heat development in the digging range.

Similar to the other Doosan wheel loaders, operators can choose between three power modes that adjust the maximum engine rpm based on the operator’s preference and the application. Since the DL420-5 CVT wheel loader uses a hydrostatic transmission, the engine rpm is not directly correlated to the machine’s travel speed, so maximum travel speed remains unaffected.

The popular auto-shutdown system is also available on the new DL420-5 CVT wheel loader to help owners and operators save valuable fuel during non-working conditions. Operators can configure the idle time before auto shutdown, from 3-60 minutes. When enabled, the feature will shut down the wheel loader’s engine when the preset idle time is met.

For more information on companies in this article

Related Content

  • Doosan’s DL280-5 wheeled loader fronts the 12-model series
    February 28, 2018
    Doosan’s new DL280-5 wheeled loader is aimed specifically for waste, recycling and general industrial duties. The DL280-5 is the latest unit in the high-performance 12-model wheeled loader range of operating weights from 12-35 tonnes. It also comes as the company celebrates a milestone – 400,000 units sold in Doosan’s 40-year history. The front lift arm of the DL280-5 is powered by a closed centre hydraulic system with a 210 litre/min axial piston pump for maximum hydraulic performance without producing
    Read More
  • Doosan loaders for Breedon and Boer
    May 14, 2018
    Breedon Group, a major independent construction materials group in the UK, has purchased new Doosan DL550-5 and DL450-5 wheeled loaders for two of the company’s operations in Scotland. The DL550-5 unit is operating at Edzell Quarry near Brechin and the DL450 is working at Tom’s Forest Quarry in Kintore. The machines were supplied by Balgownie, the local authorised Doosan and Bobcat dealer in Inverurie. The DL550-5 and DL450-5 are powered by the Scania DC13 6-cylinder engine. They Provide generous torque at
    Read More
  • Doosan announces the arrival its smallest 300-5 series wheel loader
    April 22, 2015
    INTERMAT sees the birth of Doosan’s latest arrival, the DL300-5 baby wheeled loader, the smallest machine in the South Korean firm’s DL-5 generation. Doosan’s launch of the 300-5 at Intermat comes only a few weeks after it unveiled the largest wheeled loader in the family, the DL550-5. This was also on display at the Paris exhibition. In between are the 350, 420 and 450, says Doosan’s wheeled loader product manager Sebastien Claude. The 300-5 series, which replaces the Stage IIIB DL-3 series launched
    Read More
  • Doosan announces the arrival its smallest 300-5 series wheel loader
    January 6, 2017
    INTERMAT sees the birth of Doosan’s latest arrival, the DL300-5 baby wheeled loader, the smallest machine in the South Korean firm’s DL-5 generation. Doosan’s launch of the 300-5 at Intermat comes only a few weeks after it unveiled the largest wheeled loader in the family, the DL550-5. This was also on display at the Paris exhibition. In between are the 350, 420 and 450, says Doosan’s wheeled loader product manager Sebastien Claude. The 300-5 series, which replaces the Stage IIIB DL-3 series launched
    Read More

Highlighted Content